« previous next »
Pages: [1]

Author Topic: 1.1.27 problem with launch indicator  (Read 9032 times)

Offline GTOBB

  • Jr. Member
  • **
  • Posts: 33
  • BHP: 5
1.1.27 problem with launch indicator
« on: April 23, 2009, 02:16:43 am »
Hi
I have got problem with launch control , switch is connect to input 5 , FPGauge show 0 or 5v corectly but on main screen  LAUNCH indicator not change status, all time is ON, I will test launch tomorrow -  ist working or not.

firm.. is 1.2.27 12x12  auditrigger.
Logged
DIGITUN.PL

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.1.27 problem with launch indicator
« Reply #1 on: April 23, 2009, 05:55:44 pm »
What are your settings in the launch control window?
Logged

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: 1.1.27 problem with launch indicator
« Reply #2 on: April 24, 2009, 04:29:12 pm »
Quote from: gunni on April 23, 2009, 05:55:44 pm
What are your settings in the launch control window?
Maybe need pullup to 5V
Logged

Offline GTOBB

  • Jr. Member
  • **
  • Posts: 33
  • BHP: 5
Re: 1.1.27 problem with launch indicator
« Reply #3 on: April 24, 2009, 05:20:29 pm »
input channel 5 is pull up to 5V by 4,7kilo , indicator is not change status when i connect input to GND ( all time is on) , but  FPGauge  change status and show 5 or 0 volt.
Logged
DIGITUN.PL

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.1.27 problem with launch indicator
« Reply #4 on: April 24, 2009, 05:33:34 pm »
you probably have the wrong input channel selected?
Logged
Pages: [1]
« previous next »