« previous next »
Pages: [1] 2 3 4

Author Topic: 1.0.78  (Read 40195 times)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
1.0.78
« on: August 12, 2008, 12:44:23 am »
Quote
1.0.78 is now useable, including SD logging and MAT-enrich tuning.
Vemstune will get some convenience
and warning features, eg. if HIGHBOOST=0 but ECU is in highboost (table kpa unit=2 kPa) mode.
See
http://www.vems.hu/wiki/index.php?page=GenBoard%2FUnderDevelopment%2FFirmwareChanges

1.0.78 seems good so far, officially testing, but basically ready for release.

    * after uploading config, you MUST __MANUALLY__ ADJUST
    * MAT correction (enrichment) (X and Y axis, 8+8 values, use defaults)
    * N2O (disable)
    * use recent [vemstune]

vemsTune-Install-2008-08-06.exe or later to set these

        * and to set SD log parameters (automatic logging to SD card after engine start) and save [SD log] and convert to csv for analysis

http://www.vems.hu/download/SD/v3SDcard.htm

Am I seeing two things.
a SD card logger.
a New GUI?
« Last Edit: August 12, 2008, 01:45:24 am by gunni »
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 1.0.78
« Reply #1 on: August 12, 2008, 08:25:56 am »
It looks like it doesnt it?  Having tested the GUI I find that it crashes almost all of the time, so I'd stick to using MT with the .ini file provided.

Regarding the SD card, theres even some info on how to set it up: http://www.vems.hu/download/SD/v3SDcard.htm
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 1.0.78
« Reply #2 on: August 12, 2008, 08:39:57 am »
On my XP it crashes too.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.0.78
« Reply #3 on: August 12, 2008, 01:51:28 pm »
Yea it crashed on my Vista as well.

I´m also seeing duty cycle boost control, Am I too assume it´s working with 1.0.78 firmware?
The .ini file for Vemstune does that work with MegaTune? Is that what your´s saying.

I am digging though having the gauges when your tuning which wasn´t possible with MT, i.e I always used the VE table and not the live tuning bit. cause I don´t like that view :)
« Last Edit: August 12, 2008, 01:55:36 pm by gunni »
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 1.0.78
« Reply #4 on: August 12, 2008, 03:56:00 pm »
All the complaints I've ever had have been about the lack of a live table (no +&- function on cells or rows).
About a year ago I did this:
Some more development on the Table Editor, which is still very much in Alpha and effectively non-functional (no ECU interaction).

Ctrl-L allows editing of the load table.
Ctrl-R allows RPM table editing.
Ctrl-C copies the content of the selected cell.
Ctrl-V pastes the copy into the selected cell or group of cells.
F9 changes to VE table.
10 changes to Ignition table.
11 changes to Lambda table.
Select a group of cells in the main table:
Page Up to increase the cells' value.
Page Dn to decrease the cells' value.
Type a numeric value to set the selected cell's
Bounds checking for keyed entry (0-255 for VE, xx.(25|50|75) for ignition, 0.7->1.x for lambda) Lambda does not scale correctly - please advise
Small increment with q|+|Pg Up
Small decrement with w|-|Pg Dn
Large increment with e|Ctrl +|Ctrl Pg Up
Large decrement with r|Ctrl -|Ctrl Pg Dn
Paint value - Ctrl Up, Down, Left, Right
Download from http://www.vems.co.uk/VEMSTech/table.zip

No one seemed bothered so I didnt carry on development.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.0.78
« Reply #5 on: August 12, 2008, 06:12:00 pm »
DAMN

That needs to be in the table tuning those are AWESOME commands and desperately needed.



Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 1.0.78
« Reply #6 on: August 12, 2008, 09:44:00 pm »
I use Megatune 2.25p1.
It allows to select any square region on table and do + - * and =.
http://www.diyautotune.com/videos/megatune/megatune225p1_multicell_select.wmv
Very usable!
GUI allows select row or column = less usable. Allways need some region.
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 1.0.78
« Reply #7 on: August 12, 2008, 10:55:36 pm »
Do you have an executable?  I'll put together a MegaTune download with the correct .ini files if you do.

Cheers

Rob
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 1.0.78
« Reply #8 on: August 12, 2008, 11:14:15 pm »
It is here: http://not2fast.com/megasquirt/mt/2.25/mt225p1_setup.exe
IRC megatune.exe was enough.
Logged

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: 1.0.78
« Reply #9 on: August 12, 2008, 11:37:29 pm »
Hi,
Ooohh, this all looks good  ;D
Please gimme the + & - setup, I really miss that!
Cheers,
Gavin :)
Logged
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

Offline mr_g

  • Full Member
  • ***
  • Posts: 205
  • BHP: 9
Re: 1.0.78
« Reply #10 on: August 13, 2008, 08:22:03 am »
Will we get this 1.0.78 with that megatune in package?

Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 1.0.78
« Reply #11 on: August 13, 2008, 09:22:53 am »
Quote from: mr_g on August 13, 2008, 08:22:03 am
Will we get this 1.0.78 with that megatune in package?


It feature stands in any package on my PC: just replace megatune.exe
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 1.0.78
« Reply #12 on: August 13, 2008, 10:06:14 am »
I usually put the MegaTune+Vems firmware packages together so I'll be doing this when I'm happy that 1.0.78 is working well.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.0.78
« Reply #13 on: August 13, 2008, 03:40:46 pm »
If you want to set up a test package with MT
I have a great candidate to test some of the things on.

most importantly duty cycle boost control.
The VE table tuning functions in the p1 MT package.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 1.0.78
« Reply #14 on: August 28, 2008, 07:13:53 pm »
http://kotisivu.dnainternet.net/sakrkorh/vems/firmware_1.0.78.zip

Is this yours Rob?
It doesn´t seem to have the live table editing bits.
Logged
Pages: [1] 2 3 4
« previous next »