Testing outputs for 3x2 coil

[gox]

There is 4pin connector,4 for +Vbatt and 3 pins for coils.
Problems is that i`m not shure if pin1 is for 1st 2 coils,how do i test ignition outputs on vems,i know that command is something like mdh...
I want to test the pins to know what pin fires which coils...

[dnb]

The command is mdnXX where XX is 00, 01, 02 etc.

Be aware that the XX represents the position h[2] table, so you need to populate this first.