Author Topic: 1965 Mini traveller VEMS GT17 TBi  (Read 8631 times)

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
1965 Mini traveller VEMS GT17 TBi
« on: March 21, 2008, 06:23:03 pm »
Hi,
I'm so chuffed you wouldn't believe it!   ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Here it is, 1st throw of the key :)
http://home.freeuk.com/bat/startup.3gp (Quicktime)
OR
http://www.teamtorque.co.uk/pics/startup.wmv (Windoze media player)
Thanks to everyone that helped   :)
Cheers,
Gavin :)
« Last Edit: March 22, 2008, 01:32:08 pm by Bat »
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 1965 Mini traveller VEMS GT17 TBi
« Reply #1 on: March 22, 2008, 10:42:39 am »
Nicely done.

Are you using much of a priming pulse at the moment? I remember that I had to press the accelerator to help it catch.
It sounds rich when running so maybe you need to increase your cranking PWs the base VE will probably clean up the afterstart enrichment.

I still think that twin TBi would be interesting, my old 1380 worked lovely on twin 1 3/4" SUs.

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: 1965 Mini traveller VEMS GT17 TBi
« Reply #2 on: March 22, 2008, 01:59:29 pm »
Hi,
Thanks Rob. It's a bit rich, time to try out my tuning skills  :o
That's running the Elise setup with just changes to Req fuel, ign and inj configs
I checked the sparks were right before I did the fuel, swapped coil pack wires over and the timing marks lined up spot on!
I couldn't believe my ears when it fired a few times when I cranked it over. It needs a bit of throttle to get it going and keep it running as I've got no idle air bypass fitted yet ::)
Couple more videos....

http://www.teamtorque.co.uk/pics/runup.wmv

http://www.teamtorque.co.uk/pics/runupmt.wmv

Cheers,
Gavin :)
« Last Edit: March 22, 2008, 05:14:44 pm by Bat »
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: 1965 Mini traveller VEMS GT17 TBi
« Reply #3 on: May 04, 2008, 07:17:20 pm »
Hi,
ISCV fitted yesterday :)
Just got to set it all up now!  :o
Cheers,
Gavin :)
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk