Display values keep increasing and no refresh back

[Wolf_Tm]

Hi,
I already had a look at the previous threads but didn't find an answer.
So i started the engine, but I found the Round not to work correctly, as the lambda and egt values doesn't fluctuate back when needed (for a richer mixture and for minor egt), and the only way to refresh the lower values is to push the button.

Please have a look at the video:
http://youtu.be/ETYi1caEzic

Any advice?
Thanks

[Wolf_Tm]

SOLVED.
I turned back from 1.5.7 fw to 1.5.3, and everything is fine now.

[VEMS]

Hello Wolf_Tm,

You seem to have enabled "peak hold mode" for some (or all) of the display slots, for more info see: http://vems.hu/vt/help/round/round_display_peak_hold_settings.html

Best regards, Dave

[Wolf_Tm]

Hello Wolf_Tm,

You seem to have enabled "peak hold mode" for some (or all) of the display slots, for more info see: http://vems.hu/vt/help/round/round_display_peak_hold_settings.html

Best regards, Dave

As you can see, that's the page I got with the latest firmware, and as per page title it says "Display Mode Settings", no referring to a Peak & Hold setting:

[jrussell]

Here's the menu to access where it's set




And how to set the slots

[Wolf_Tm]

Here's the menu to access where it's set




And how to set the slots

Yes, jrussel...
what I meant is that the 2014 August issue I got came from the fact that in the 1.5.7 i had there was no Peak & Hold settings window under the Display menu.

[VEMS]

With any new feature in firmware we also push new configuration menu's to Vemstune; Make sure you have updated your Vemstune installation to the latests state, in Vemstune->Preferences-> Update ini files from web (internet accesses is required to perform this action successfully). After update start Vemstune and you should have the menu when connected to your round.

Best regards, Dave

[CamB]

I have the same problem.

It is also "fixed" for me by using firmware 1.5.3, although fixed means that it isn't in peak & hold mode any more but I still can't see the Display peak hold settings menu unfortunately. This is a bit annoying as I'd like to set up a view with peak and hold.

If it matters:

- serial number is 1039, and I am testing it on the bench (I thought that was prudent as I bought it years ago and only just getting to using it)
- tried various firmwares and versions of Vemstune back to 2011

[VEMS]

Hello CamB,

Let me repost/quote:

With any new feature in firmware we also push new configuration menu's to Vemstune; Make sure you have updated your Vemstune installation to the latests state, in Vemstune->Preferences-> Update ini files from web (internet accesses is required to perform this action successfully). After update start Vemstune and you should have the menu when connected to your round.

Did you run these updates ? If so, please make a bugreport from VT with your round connected, that way i have all relevant info about your user configuration.

Best regards, Dave

[CamB]

Yep - did all the updates with latest Vemstune. Also multiple firmware and Vemstune combinations.

Will try do the bug report tonight - thanks for your help.

At the moment I am on the older firmware (with working gauge) and latest Vemstune / ini files. Is it more useful to you if I do the bug report on this setup or should I go to the latest firmware too (I don't have the peak and hold menu item either way)? Carries a minor risk for me of losing the gauges functionality but since I got it working once I suppose I can do it again.

[CamB]

Done, with firmware 1.5.10 as peak/hold looks to have only been an option since 1.5.7.

Menu item not there, and I added a screenshot to the error report:

http://vems.hu/vemstune/bugreports/reports.php?cmd=view&key=4dZIY3

[VEMS]

Hello CamB,

Thanks for the report was able to pinpoint the issue.

1.5.10 requires a Dev version VT (04-04-2015) as annotated on: http://www.vems.hu/wiki/index.php?page=AfreshTiny
Required VT version available here: http://vems.hu/download/v3gui/dev/VemsTune-Install-2015-04-04.exe

Any version between 1.5.7 and 1.5.9 should work without problems with your current VemsTune version.

Best regards, Dave

[CamB]

Works well - thanks (and I promise to read the instructions better next time).

Cam