Author Topic: Impreza loom adaptor  (Read 8696 times)

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Impreza loom adaptor
« on: February 01, 2007, 12:20:03 pm »
Thanks to Rob I now have most of the parts I need for my prototype Impreza loom adaptor.
This will be built over the next week or so.

I have had an idea regarding a production version...  It also has potential applications in other areas, provided the costs come out OK.

We take a VEMS case extrusion and chop it into 3 (or 4) pieces so that we have 3 smaller cases.  Take some standard end plates, some PCB mount EC connectors that mate with the VEMS connectors and then the Subaru ECU connector.  Make a PCB where these all fit, containing the transient diode and resistor packs and you have a very neat robust P&P solution... :)

Offline hackish

  • Sandwiches
  • Jr. Member
  • *
  • Posts: 2
  • BHP: 0
Re: Impreza loom adaptor
« Reply #1 on: February 21, 2007, 04:39:09 pm »
dnb did you get the subaru to run on VEMS? I've looked at the plug and play type things for a while now and I'm convinced that the best solution is to make a conversion harness so additional wires will be easily accessible.

-Michael

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Impreza loom adaptor
« Reply #2 on: February 21, 2007, 06:21:16 pm »
Not finished yet.  I'm currently gearboxless in the Subaru! 

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: Impreza loom adaptor
« Reply #3 on: February 22, 2007, 04:53:01 pm »
Will you be using stock Crank angle sensor as a primary trigger?

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Impreza loom adaptor
« Reply #4 on: February 22, 2007, 05:15:12 pm »
Yes.  Provided the code mods work as expected. 

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: Impreza loom adaptor
« Reply #5 on: February 23, 2007, 09:50:27 am »
:D

Cool.

What type of trigger does the Subaru use?
24+1, 24+4 ???

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Impreza loom adaptor
« Reply #6 on: February 23, 2007, 10:06:33 am »
Subaru trigger is weird.  It has 6 uneven teeth on the crank and 1, 2 or 3 pulses at 90 degree intervals on the cam.  It seems to work for Subaru but is a headache for the rest of us!