VE scale Alpha-N blend with Speed Density for ITB engines with turbo

[turbojoy]

Hi all,


I have itb's on my V12 so for the NA part it's Alpha-N and speed density when boost comes up.
I know that there is a boost compensation table for the boost.
But:
How to setup the Y axis of the VE table for my setup?
Does anyone have an example?
From 0 to 100%(tps) or from 0 to 250(kpa)?   

The VE table is 16x14; the igntion table is 12x12.
How to change the ignition table to 16x14? (in VT)

Boost table is 8x8.
Can this be enlarged to i.e. 12x12? 

Any advice welcome!
Tommy

[VEMS]

Hello Tommy,

Table sizes are fixed size, they cannot be changed from configuration.

VE table for Alpha-N with boost compensation needs to have Y axis set to TPS, and bins 0-100% TPS. The boost compensation is done in Map Correction Table.
More info about configuration of table axis is F1 help: http://vems.hu/vt/help/v3/v3_alphan_settings.html.

Best regards, Dave