« previous next »
Pages: [1]

Author Topic: Trigger problem when cold  (Read 5413 times)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Trigger problem when cold
« on: January 03, 2014, 10:52:13 am »
Hi all

I have a Car with a 36-1 primary trigger , that har trigger errors when the weather is cold ,
I have changed the crank trigger but No change ,
If i park the Car in the garage it fires right up and runs great
The trigger error is on when below 5 degrees it so ,
The CAS is 1.9kohm , and thats normal for this Car
Its a older vems ecu around number 700 , so i belive its something with the resistors on the trigger that need to be changed a bit ,
Anyone Got Any suggestions were to start and what resistor to change ?


Thanks
Skassa
Logged
working on the boxer

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Trigger problem when cold
« Reply #1 on: January 05, 2014, 01:08:48 am »
Check shield of primary trigger cable.
Logged

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Trigger problem when cold
« Reply #2 on: January 20, 2014, 04:39:41 pm »
It was indeed the shielding that was broken :)
So its working again


Thanks
Skassa
Logged
working on the boxer
Pages: [1]
« previous next »