Audi B5 RS4 Avant 2001 with DBW

[Sukhoi]

Hi,

here is another project that we have done lately, the Audi now works perfectly and smooth, the next step will be adding ARP head studs and thicker head gasket for extra boost, it was tricky to control the DBW throttle but we managed to start the engine.

Project Status: VEMS installed.
Location: Amman-Jordan car originally from Saudi Arabia .
Car: Audi B5 RS4 Avant 2001.
Engine: Code AZR - 2.7L V6 BiTurbo.
Engine Build: full stock engine.
Boost: Stock Boost.
Fuel: 95 Octane.
ECU: VEMS 3.6 / Stock Harness.
Trigger System: Stock 60-2 trigger / Cams-Sync.
VEMS Motorsport options: Launch Control, WOT Shift.


Here a youtube link that I recorded for the engine idling, soon hopefully I will post some photos.

http://www.youtube.com/watch?v=NkNF6n5oLjQ


Thanks for all the guys that shared info to start this engine

[Kamuto]

nice

[VEMS]

Congratulations, very well done!

Best regards, Dave

[Sukhoi]

Thanks guys

here some photos, hope to add more soon

[tonci]

Did you manage to get A/C working with vems? If you did how?

[NOTORIOUS VR]

Hi,

here is another project that we have done lately, the Audi now works perfectly and smooth, the next step will be adding ARP head studs and thicker head gasket for extra boost, it was tricky to control the DBW throttle but we managed to start the engine.

Project Status: VEMS installed.
Location: Amman-Jordan car originally from Saudi Arabia .
Car: Audi B5 RS4 Avant 2001.
Engine: Code AZR - 2.7L V6 BiTurbo.
Engine Build: full stock engine.
Boost: Stock Boost.
Fuel: 95 Octane.
ECU: VEMS 3.6 / Stock Harness.
Trigger System: Stock 60-2 trigger / Cams-Sync.
VEMS Motorsport options: Launch Control, WOT Shift.


Here a youtube link that I recorded for the engine idling, soon hopefully I will post some photos.

http://www.youtube.com/watch?v=NkNF6n5oLjQ


Thanks for all the guys that shared info to start this engine

Very nice, but can I ask what you did to make the tacho work?  Normally the kombi/cluster gets this info via CANbus from the ECU.

Is there an input for engine speed that works with the tacho out on the VEMS that you can share?

Thanks,