Author Topic: has my vems died  (Read 6147 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
has my vems died
« on: September 13, 2013, 04:44:07 pm »
hello all,

So my vems was running fine, engine was idling in the garage, it went really lumpy and the engine cutout.

now no vems, no lcd, no fuel pump and engine wont start.

Disconnected everything and tried a few times, but nothing, all fuses ok in the wiring, and everything else in the car is fine...

Anyone point me where to go next.

thanks

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: has my vems died
« Reply #1 on: September 13, 2013, 06:37:08 pm »
12v to the ecu is there?
all grounds are there?
no bad smell of the ecu?

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
Re: has my vems died
« Reply #2 on: September 20, 2013, 05:03:11 pm »
yes found the problem was a loose connection on the inside of the car loom fuse box to one of the fuses....now my vems is working again.

Always the simple ones that are the hardest to find.....just hope it doesn't happen while I am driving the car.

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond