retard ignition on 1 st gear

[kriskis]

I need turn on option to retard ignition on first gear who can do this for me ?
[/URL][/img]

config
http://www.sendspace.pl/file/7614792979afb9f9366d261

[jrussell]

Go to the Motorsports menu
Change "Anytrim mode" under Anytrim3 to spark corr
Change "Input control source" under Anytrim3 to "Speed 1 input" (or Speed 2 input if that's what you want)
Go to Motorsports -> Anytrim3 Curve and make it what you want based on road speed.

That's about as close as I can come to a 1st gear ignition adjustment at the moment.

[Erikk]

If you want to retard e.g. 10deg of ignition on first gear:

Base Setup -> Gear or Speed dependent Spark retard.
Choost Gear dependent.
Advance Gears 2-6 by 10deg ( By putting -10 in the settings ).

Add 10deg to the primary trigger angle.



Then ign table is "correct" at gears 2-6, and retarded 10deg on first gear.


Modified config:

https://dl.dropboxusercontent.com/u/54390545/retarded.vemscfg