will vems...

[reevio]

Got the car started at last had to set the dwell as high as 8ms runs but not well I'm getting around 50 kpa on the map sensor on idel maybe ignition timing is out slightly soon as I apply any throttle it bogs and stalls need to check injectors are also firing correctly

[reevio]

Wen out yesterday and turned ignition on and no fuel pump think I'm going to change all the igbts in the ecu because somedays they work and other times they don't ?

[rob@vems.co.uk]

When a semi-conductor like an IGBT or FET has blown, it doesn't come back to life.
Intermittent faults can be down to dry joints, loose crimping, or if the loom's wire has been compromised.

[reevio]

Literally a brand spanking new loom which I've just soldered my ends onto so not sure il get the igbts ordered and changed for peace of mind atleast