Author Topic: 91 Audi CQ 1.8t swap 67mm (Read 23143 times)

boostd audi · « **Reply #15 on:** December 28, 2011, 05:27:56 pm »

Once i get my turbo back i can finish the IC piping and get this running. woooo hoooo

boostd audi · « **Reply #16 on:** December 28, 2011, 06:22:05 pm »

mounted up bumper

boostd audi · « **Reply #17 on:** January 07, 2012, 01:09:04 pm »

new turbo

and seats

boostd audi · « **Reply #18 on:** January 07, 2012, 01:18:56 pm »

made some sweet shirts to represent some VEMS

boostd audi · « **Reply #19 on:** January 08, 2012, 06:34:12 pm »

boostd audi · « **Reply #20 on:** May 28, 2012, 01:38:14 am »

running great around 320kpa for now

Jim_W · « **Reply #21 on:** May 30, 2012, 11:04:41 pm »

Looking good

boostd audi · « **Reply #22 on:** June 02, 2012, 03:29:04 pm »

thanks jim..

next step is making a New intake.. after running 35 psi or so and putting the go pro in the engine bay. i can see flexing on the top flat plenum surface.

so i think we will change it before it cracks or blows apart.

News:

Author Topic: 91 Audi CQ 1.8t swap 67mm (Read 23143 times)

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm

Jim_W

Re: 91 Audi CQ 1.8t swap 67mm

boostd audi

Re: 91 Audi CQ 1.8t swap 67mm