VemsTune for Android ?

[PeepPaadam]

Got it working, though the ISP pins are in reversed order. I made a drawing with the connections necessary to connect cheap HC-06, worked very well and VEMSTune also easily connected, tuned the car without wire.

But, the COM port on VEMS did not respond when I had connected HC-06, should it be like that?

[mads b (dk)]

Remove Tx on HC-06 to use computer.....

[PeepPaadam]

You mean using computer through VEMS RS232 port right?

[mads b (dk)]

Yes to use your computer through rs232 you have to remove Tx on hc-06

[Kamuto]

Yes to use your computer through rs232 you have to remove Tx on hc-06

and where is the point of using it then?

[PeepPaadam]

Then you can use the HC-06 with VEMSDisplay for Android, not for tuning with laptop.

[Kamuto]

Then you can use the HC-06 with VEMSDisplay for Android, not for tuning with laptop.

it works really good for mapping when you are like having some noise or something which leads usb-rs232 randomly disconect

[PeepPaadam]

What I meant that when you disconnect Tx, then you can use HC-06 for Android and RS232 for tuning, when Tx is connected, you can do both.

[NOTORIOUS VR]

What I meant that when you disconnect Tx, then you can use HC-06 for Android and RS232 for tuning, when Tx is connected, you can do both.

Can you clarify please?

Is using HC-06 connected to ISPI only for connection to Android tablet?  Not for tuning via laptop over BT?

What about BT connection to tablet + tuning via COM port at same time? 

[NOTORIOUS VR]

What I meant that when you disconnect Tx, then you can use HC-06 for Android and RS232 for tuning, when Tx is connected, you can do both.

Can you clarify please?

Is using HC-06 connected to ISPI only for connection to Android tablet?  Not for tuning via laptop over BT?

What about BT connection to tablet + tuning via COM port at same time?

Bump for clarification... Anyone?

[PeepPaadam]

You can tune with laptop also when using HC-06 in ISP port, but not simultaneously. Also when HC-06 is connected to ISP, RS232 port does not work, at least the one for connecting laptop. Haven't tested 2nd RS232 port.

[NOTORIOUS VR]

You can tune with laptop also when using HC-06 in ISP port, but not simultaneously. Also when HC-06 is connected to ISP, RS232 port does not work, at least the one for connecting laptop. Haven't tested 2nd RS232 port.

So for clarification... if HC-06 is connected to ISP port, it can be used for AIM & Triggerframe to BT/Android tablet and also tuning in vemstune... you just cannot do both, even if using normal serial port connection on ECU.  So realistically the only advantage here is that the BT module is inside the ECU case?

[PeepPaadam]

Yes, exactly.

I have used this way for two years or so, never had any problems and really would not go back to RS232 again.

[NOTORIOUS VR]

Yes, exactly.

I have used this way for two years or so, never had any problems and really would not go back to RS232 again.

Thanks for the clarification!