Author Topic: is it possible Injector staging for a 5 cylinder?  (Read 7591 times)

Offline Regler

  • Jr. Member
  • **
  • Posts: 25
  • BHP: 3
is it possible Injector staging for a 5 cylinder?
« on: February 01, 2011, 09:29:06 pm »
I think i request for a 5 cylinder 10 injector outputs for staging function but the vems have 8 Injector outputs.

what can i do?


Offline Throttle

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Re: is it possible Injector staging for a 5 cylinder?
« Reply #1 on: February 20, 2011, 10:08:14 am »
Hello !

At first : My english is not "so good" , i'm sorry for that !

I've seen in the manual a picture how to wire 8 injectors. Below that is a picture called "And to pair injectors in parallel" !

Please look here : http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide

May be it works when you wire two injektors on one exit of the ECU, but i think they must have high impedance ...

I cant promise you but its the way i see  ;)

Best regards Martin from germany

Offline Regler

  • Jr. Member
  • **
  • Posts: 25
  • BHP: 3
Re: is it possible Injector staging for a 5 cylinder?
« Reply #2 on: February 21, 2011, 06:42:17 pm »
Hello,

i have speak with Marcell and he give me the solution

THX.

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: is it possible Injector staging for a 5 cylinder?
« Reply #3 on: February 21, 2011, 11:54:47 pm »
And what was the solution?

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: is it possible Injector staging for a 5 cylinder?
« Reply #4 on: February 22, 2011, 03:11:15 am »
In VemsTune, press F1 in the "injector staging" dialog.

With 5 primary injectors, you have 2 secondary injectors directly following the first 5 in the injector output table.

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: is it possible Injector staging for a 5 cylinder?
« Reply #5 on: February 22, 2011, 11:59:30 am »
So you'd need to put up to two larger injectors further out in the inlet then?

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: is it possible Injector staging for a 5 cylinder?
« Reply #6 on: February 22, 2011, 12:24:55 pm »
Yes, or put it another way: You have two outputs to drive however many injectors you need further upstream from the head.

Example :With 5 extra staged injectors wired 3 and 2 in parallell on the two staged outputs.
« Last Edit: February 22, 2011, 12:26:50 pm by mattias »