« previous next »
Pages: [1]

Author Topic: EGT calibration & offset  (Read 9869 times)

Offline tonci

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 1
EGT calibration & offset
« on: May 30, 2007, 04:32:14 pm »
What is recomended egt calibration and egt offset number for wbo2 and egt gauge? I have 5mm egt probe.
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: EGT calibration & offset
« Reply #1 on: May 30, 2007, 08:15:13 pm »
I use the stock VEMS egt calibration value of 71, and then use the offset to adjust the temperature using the offset using a known temperature source.  Boiling water and ice are the best to get your values sorted.

Logged

Offline tonci

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 1
Re: EGT calibration & offset
« Reply #2 on: May 31, 2007, 09:12:58 pm »
Quote from: rob@vems.co.uk on May 30, 2007, 08:15:13 pm
I use the stock VEMS egt calibration value of 71, and then use the offset to adjust the temperature using the offset using a known temperature source.  Boiling water and ice are the best to get your values sorted.


Thanks mate ;D...one more thing is that 71 in hexa code or in deci code in megatune?
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: EGT calibration & offset
« Reply #3 on: May 31, 2007, 11:17:47 pm »
Deci code, VEMS egt_cal is 0x49 +/- 1 in Hex :)
Logged
Pages: [1]
« previous next »