once i get paid may give you a shout mate :-)
a couple of things,
took car for run tonight and had to lower the accel enr, as it was giving readings of .71 when you touched the throttle, i thinks its to lean now, but can work on that,
1: car runs a lot sweeter, although the table needs tweaking to suit, more mapping needed,
turned car off to get fuel, went to restart and had the most horrendous kickback ever, i have a 1.8kw gear reduc starter on the v8 and it stopped that dead,
once fired was fine started normal every time after,
in priming, crank after start crank ign adv i have turned it down from 12.00 deg to 5.00 deg, that sound ok?
also after start settings, what are the norms? mine are, cold 200 cycles,
warm 20 cycles.
2: idle control:
PID idle control: enabled or disabled?
Idle IGN Advance: enabled or disabled?
Stepper Idle Control: Min steps allowed? In Idle air reference position my lowest setting (70C) is 25,(REF STEP) should the min steps allowed be lower than this?
