Well finally I´m getting somewhere.
I´ve got the M50 engine, and will be rebuilding it over christmas,
if you guys could reccomend a place to get a gasket set (head and bottom) that includes as many gaskets as possible that would be great.Here it is sitting in the engine bay, which is where I´m storing it until rebuilding.
The engine loom is now in my house where I´ll be modding it and removing some things that don´t need to be there.
Still no date on startup and mapping, but I´ll be posting pics and information as they develop.
I have already done a preliminary map in the ecu that should make the car 100% around town drivable only needing minor fine tuning.
Here I have plotted where and how I´ll be running the boost and where it should be coming in.
Turbo is a 7blade Holset HX40 Super60
This is the proposed dyno chart I have worked out. The HP1 and Torque1 would likely come out like this If I let it spool uncontrollably to 1.5bar
But I´ll see how it´s on the street with such a crazy hp change in a matter of 500rpm´s.
The engine setup is going to be crazy good fun when finished. And I´ll post some videos and info of course.
