« previous next »
Pages: [1]

Author Topic: TDC after trigger min value  (Read 5615 times)

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
TDC after trigger min value
« on: March 30, 2009, 07:30:04 pm »
Can this setting get minimal value? For example 0?
Is it make some trouble?

My friend has a v8 bmw with 60-2 with this settings:

tdc after trigger : 0
num of teeth on wheel: 58
trigger tooth: 10
next trigger tooth: 15
crank min: 0

with 1.1.27 fw

thx
Logged

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: TDC after trigger min value
« Reply #1 on: March 30, 2009, 07:39:32 pm »
It can work but only if ignition output table is rotated. It's not recommended because it makes config more messy.
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: TDC after trigger min value
« Reply #2 on: March 31, 2009, 02:04:09 am »
60 teeth = 6 deg per tooth
trigger tooth of 10 = 60deg after trigger.

Setting trigger tooth to 1 and TDC after trigger to 54 would give you upto 54degrees of advance.
Logged
Pages: [1]
« previous next »