Got a customer who I have convinced to go with VEMS rather than a Motec plug and play unit for his Evo6. I think the price difference persuaded him (£1650+VAT for the motec...without any fancy add ons that you have to pay for) Not only that, but with the VEMS I can lose the airflow meter etc to tidy the engine bay up, which he is keen to do.
The thing being the triggering issue.
http://vic.doitbig.org/triggerdisc/images/stock_evo_disc.jpg is a picture of the stock setup on the crank which is hall sensed. It obviously also has a cam sensor, which I am yet to get a good look at, but is easily modified. I CAN get a 12 tooth trigger from
www.triggerdisc.com , but if you read the details, it requires removal of the balancer shafts, as the trigger also holds the belt where it should be. This is a bit of a no no, as the customer only wants a new ECU, not an engine rebuild, also not when another ECU (the motec) has no problems with it......
Any experience or suggestions welcome.
Many thanks
-Gavin
*EDIT* Had confirmation from the vems UK head honcho (Rob!) VEMS has been used on EVO's and just to use the "Simple" trigger with a mod on the cam trigger to give just 1 pulse. All good! */EDIT*
