Nearly stalling when starting from cold

[Tony C]

right been playing again,
she fires up when cold then stalls after a few seconds and then on restart fires and idles around 800-1000 rpm,
which is better than before,
im heading the right way slowly

[dnb]

Increase the size of the afterstart parameters...  They do seem to need to be large.

[Tony C]

which bits Dave?

[dnb]

In MT in priming/cranking/afterstart in the settings menu there are 2 parameters called afterstart enrichment added value and and afterstart enrichment scaling.  These need to be fairly big, otherwise you risk actually adding LESS fuel than when the car is warm!

I don't remember the actual values I use, but I will look at the car at lunchtime.

[Tony C]

cheers Dave,

[dnb]

Didn't get out at lunchtime!  Damned people wanting me to tell them what's wrong with their radars

I use 70 for the scaling and 30 for the added value.  It seems to work as I can start the car with no throttle now.

[Tony C]

hi mate.
is that the afterstart enrichment scaling at 77c % you set to 70?
and afterstart enrichment added value % to 30?

[dnb]

That's it

[Tony C]

will go try this now, ta mate.

[Tony C]

well she started from cold (before changin the above)
and near died then picked up to 900,
its this near diying i need to cure now
i set the above settings as per yours dave, starts good when hot will see if its any better when cold in morning,
ta again mate.

[Tcal]

I was wondering that did you get this problem cured?
I´m having same kind of problems.

[Tony C]

nah i aint cured it as of yet,
i changed a few things but never made any difference
so left it as was,

[Tony C]

at last we are getting somewhere.
dnb is a star. the car runs from cold now, not sure if dave has any more tweeks to do from the datalogs he asked for, but sucess