Author Topic: confusing injector settings  (Read 9227 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
confusing injector settings
« on: February 10, 2018, 06:39:10 pm »
hello all,

After 3 years away from vems with my engine getting rebuilt, I've started looking at the settings again, before the next re-start.

Looks like a lot has changed, and I just want to clear a few things up, and make sure my settings are correct.

What is correct with the injector settings order, as the help seams to say opposite to the settings page.

As the red arrow points down, but the help says the page is traversed backwards!!!!!.

So if my firing order is 1,8,4,3,6,5,7,2, how do i set the settings?



cheers

scott



« Last Edit: February 10, 2018, 06:57:28 pm by Seight-v8 »
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: confusing injector settings
« Reply #1 on: February 10, 2018, 08:00:20 pm »
The firing order is the arrow.
The real cylinder order is there just as a guide, not a ECU setting.

What Vemstune is that?

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
Re: confusing injector settings
« Reply #2 on: February 11, 2018, 04:43:10 pm »
cheers

looks like the order I had is correct then, just thought I better ask, as least I know its ok.

should be the latest version of vemstune, with any updates applied.

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond