« previous next »
Pages: [1]

Author Topic: M50 NV pinout to Vems pinout  (Read 7286 times)

Offline maxout

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
M50 NV pinout to Vems pinout
« on: September 22, 2015, 06:35:25 am »
Is there any good document that shows the pinouts from motronic connector to vems connector? Also how after cutting the orginal wire how to get it in the vems connector properly?

Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: M50 NV pinout to Vems pinout
« Reply #1 on: September 22, 2015, 07:35:40 am »
http://www.vems.hu/files/M50Turbo/VEMS_Non_Vanos_M50_ETM_Guide.pdf

Here is a edited ETM document that shows you how to wire into the VEMS, the Motronic in this document has been replaced by the VEMS and the numbers on the ECU are the VEMS ecu pin numbers
Logged

Offline maxout

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Re: M50 NV pinout to Vems pinout
« Reply #2 on: September 22, 2015, 09:05:12 am »
 :)

Nice thanx! Regarding the connections it is enough with a regular non insulated crimp tool?

Logged

Offline maxout

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Re: M50 NV pinout to Vems pinout
« Reply #3 on: September 22, 2015, 06:42:46 pm »



is this enough, dont need any relays or fuses extra?
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: M50 NV pinout to Vems pinout
« Reply #4 on: September 22, 2015, 08:37:43 pm »
No fuse box has it all, all extra safety is up to you
Logged

Offline maxout

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Re: M50 NV pinout to Vems pinout
« Reply #5 on: September 25, 2015, 03:44:30 pm »
Does any one have more pics and tips for inspiraton to the coming wiring...   8)
Logged
Pages: [1]
« previous next »