Author Topic: 5cyl engine, 60-2 without hall - wasted spark, how to  (Read 11562 times)

Offline guzior

  • Jr. Member
  • **
  • Posts: 36
  • BHP: 1
5cyl engine, 60-2 without hall - wasted spark, how to
« on: March 21, 2012, 12:43:46 pm »
Hi.
I have problem with configure 60-2 trigger without hall in 5 cyl engine on VEMS.
Do you have any sugestion to it?
I'm thinking about run it like a 10cyl engine in wasted spark (if 6 cyl can run on 60-2 without hall (something like 3 cyl engine) why 5 cyl can't?

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #1 on: March 21, 2012, 08:55:43 pm »
It can't be done without camsync.
5-cyl engines always need full sync when running without distributor.

You can run wastedspark, but camsync is still required.
The cylinders that fires at the same time in wastedspark arent at TDC at the same time.


2 cylinders are always at tdc together on a evenfire 6cyl (or 4cyl, 8cyl) and allows you to fire those two together.

Edit. It maybe possible to run the ignition as two stroke.... Not with current firmware anyway.
« Last Edit: March 21, 2012, 09:04:07 pm by Erikk »
Sweden - erik.englund@gmail.com

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #2 on: March 22, 2012, 07:51:34 am »
Why not with current firmware??? For me it seems it allow to fire coils in such way.

5ciliner engine
two stroke (not sure)
next tooth 12
tooth table 0 12 24 36 48

cylinder fired 1 5 2 3 4   from 1 w 2 w 4 w 5 w 3 w  and r 5 r 3 r 1 r 2 r 4 r (w- wasted r-real)


Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #3 on: March 22, 2012, 08:59:02 am »
"Two stroke is Obsolete, multiply cilinder number by two and use wasted spark "


So you could probably run it as a 10cyl and configure tables as you say GintsK, but then you get two-stroke injection as well with current firmware..
Sweden - erik.englund@gmail.com

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #4 on: March 22, 2012, 05:03:39 pm »
Injection will be unphased. But there is "divider".  Divider 2 would be OK in this case. It will give injection every second spark event.

Offline guzior

  • Jr. Member
  • **
  • Posts: 36
  • BHP: 1
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #5 on: March 22, 2012, 08:45:14 pm »
Ok.
I have connected:
1 cyl to output 0
2 cyl to output 1
3 cyl to output 2
4 cyl to output 3
5 cyl to output 4

when 1 cyl is in tdc, trigger is on 7 teeth, counting from 1 teeth over the gap.

Can anyone write me proper configuration (with primary trigger config, trigger reference table, ignition autpu and basic and constans)??

V8, R6, V6, R4 etc work realy good and i haven't got any problem with configuration...

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #6 on: March 22, 2012, 09:37:18 pm »
Try so:

10 cylinder engine
four stroke
TDC after the trigger 72
first trigger tooth 6
next tooth 12
angular width 6deg

tooth table from bottom to top: 0 12 24 36 48

cylinder fired  5 2 3 4 1
IGN outputs 4 1 2 3 0  (again from bottom to top)

still 5 injectors in weird order (above) but with divider=2

Gints


Offline guzior

  • Jr. Member
  • **
  • Posts: 36
  • BHP: 1
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #7 on: March 23, 2012, 11:06:28 am »
Quote
cylinder fired  5 2 3 4 1
IGN outputs 4 1 2 3 0  (again from bottom to top)
But firing order is 1 2 4 5 3. I don't know what is mean
« Last Edit: March 23, 2012, 11:13:34 am by guzior »

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #8 on: March 23, 2012, 08:17:28 pm »
Yes. But coil firing sequence for wasted spark is 1 5 2 3 4 1 5 2 3 4


Offline guzior

  • Jr. Member
  • **
  • Posts: 36
  • BHP: 1
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #10 on: March 29, 2012, 10:37:14 am »
Hi.
I try everything but engine won't start. Any ideas?

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #11 on: March 29, 2012, 10:39:08 am »
Is the timing light showing you anything of use?  You must surely be able to get ignition on Cylinder one

Offline guzior

  • Jr. Member
  • **
  • Posts: 36
  • BHP: 1
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #12 on: March 29, 2012, 12:45:18 pm »
Car start and work on 1krpm. When I open throttle engine get stupid and stop. It's like Vems lose synchronisation. But i haven't got trigger error

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: 5cyl engine, 60-2 without hall - wasted spark, how to
« Reply #13 on: March 29, 2012, 01:24:21 pm »
Can you post .triggerlog file at cranking and .vemslog file when engine runs on 1000rpm?