« previous next »
Pages: [1]

Author Topic: Secondary trigger HALL to vems, how?  (Read 6474 times)

Offline lost

  • Sr. Member
  • ****
  • Posts: 325
  • BHP: 2
Secondary trigger HALL to vems, how?
« on: August 14, 2011, 12:01:50 pm »



Is this right?
Just wire it directly to vems v3.5

EC36 pin28 +5v            to  RED wire on hall sensor
EC36 pin26 GROUND     to  BLACK wire on hall sensor
EC36 pin13 hall signal   to  WHITE wire on hall senor


How to check on genboard that secondary hall is enabled?
Logged

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Secondary trigger HALL to vems, how?
« Reply #1 on: August 14, 2011, 02:59:39 pm »
Yes.

If secondary trigger is enabled and no signal is detected you wont get any RPM readings.
Logged
Sweden - erik.englund@gmail.com
Pages: [1]
« previous next »