Trigger log

[DMS]

http://www.vems.hu/files/DMS/v3.2_n000355-2011-05-02-16.23.57.triggerlog

Can someone give me an opinion?

I'm thinking my triggering is quite bad... Maybe the sensor is to close to the wheel?

[mattias]

With many trigger teeth the triggerlog rate will be limited by the serial port speed, in your case it's not possible to make a triggerlog with the engine running without raising the serial port speed as much as possible.

It is good enough to make a log at cranking rpm speed (200 rpm) and judging from the start of the log it looks healthy. It is definately not connected with wrong polarity.

[DMS]

Ah I was already wondering what was going on. The start is at idle, after that the rpm's go up.