new guy having setup problems with no spark.

[quattroant]

Hi, please bear with me I'm completely new to this stuff. I have an audi s2 ABY engine code 2.2 5cyl turbo with a 7a alu flywheel.

just trying to get it started for now. or at least a spark so I can have an attempt at setting it up.

ok, so I have installed the vems and im not getting a spark. measuring the vr sensor for resistance im getting 1000ohms. don't know if its good or bad?

measuring when cranking yields no voltage but Vemstune does register a RPM when cranking reading 100-150rpm in the logs

checking for a spark with a plug placed in a coil pack gets no spark at all.

the grounds are solid got a direct line from exhaust manifold to ecu

i want to follow a method but not sure what to do from here.

thanks in advance.

Ant

[gunni]

Is this a PnP ecu?

[quattroant]

it's a standard unit with an adaptor loom made up with a motronic plug on the end.

[gunni]

I do know in the PnP version there is a wire needing swapping to make it work.

Right now I can´t help any further.

Maybe have a search on the Wiki

[mattias]

If you run latest firmware and VemsTune I'm sure that the trigger log tool will help you.

If you have an RPM registering  and  you don't receive a cam sync pulse, you won't get any spark.