« previous next »
Pages: [1]

Author Topic: 2 ECU's, which to use?  (Read 14426 times)

Offline mini-valver

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
2 ECU's, which to use?
« on: September 15, 2009, 02:08:22 am »
I was running a VEMS on my K4M Clio, which ive since taken out and am in the process of fitting a F4R. I bought some ITB's and the guy gave me another VEMS and loom as spares. These ECU's both came from Angelworks but the original i was using has green bans around it, the 2 multi-plugs, MAP senmsor output and serial OBD. The blue banded ECU has these 3  and another cable coing from the front. What is it? Why is it different to my original?

Aswell as that, the loom is different at the ECU end on each multi plug, why is that? ANy help would be appreciated as Im starting from scratch wiring wise and would think my original ECU and loom will be plugb and play, just curious as to wether the 2nd ECU I have is better in any way!

Thanks.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 2 ECU's, which to use?
« Reply #1 on: September 15, 2009, 03:34:12 am »
Can you post pictures of the differences.
They will have been ordered with different specs, pictures will tell us to tell you which ones they are

And what is exactly the different in the looms? Pics again please.
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 2 ECU's, which to use?
« Reply #2 on: September 15, 2009, 03:39:00 am »
Between the two plugs you'll see a serial number, if you can let us have them I'll try and get the info.
Logged

Offline mini-valver

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
Re: 2 ECU's, which to use?
« Reply #3 on: September 16, 2009, 01:53:31 am »
The original (Green) is 1416, the blue is 1419!
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 2 ECU's, which to use?
« Reply #4 on: September 16, 2009, 04:18:21 am »
ECU with serial number 1419:

Assembled v3.3 controller
  - Flyback: 30V flyback
  - ignition driver: 4
  - Knock and EGT: yes
  - MAP connection: 400kPa (6/4mm pneumatic)
  - mounting-style: screws
  - primary_trigger: VR
  - secondary_trigger: HALL

wbo2_pump_pw_zero=0x67
wbo2_nernstdc_target=0x83
Logged

Offline mini-valver

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
Re: 2 ECU's, which to use?
« Reply #5 on: September 16, 2009, 04:25:09 am »
What does all that mean in relation to my original? Would this be the better unit to use on the F4R or can I still use the 1416 ecu and 1600 loom, even if the loom looks completely different at the ecu end?
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 2 ECU's, which to use?
« Reply #6 on: September 16, 2009, 04:26:12 pm »
It means that unit 1419 was for a boosted engine with 4 ignition channels, the extra wire is for EGT.  Some of the wiring will have been moved around at the loom end because of the possible setup differences.  Stick with your original setup if you want to reduce the hassle.

Rob

Logged

Offline mini-valver

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
Re: 2 ECU's, which to use?
« Reply #7 on: September 16, 2009, 11:03:12 pm »
Right cool, cheers.


Anyone want to buy the 1419? Lol
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: 2 ECU's, which to use?
« Reply #8 on: October 15, 2009, 09:27:13 pm »
How much for 1419?
Logged
Pages: [1]
« previous next »