Author Topic: Table sizes in 1.1.50  (Read 5572 times)

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Table sizes in 1.1.50
« on: March 12, 2009, 08:08:48 pm »
It is normal that the Vemstune shows 16x14 Ve, 12x12 Spark and 8x8 Lambda table?
From which firmware bring this changes?

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Table sizes in 1.1.50
« Reply #1 on: March 12, 2009, 09:19:59 pm »
I've heard of some talk of table scaling or the like, perhaps they were talking about this...

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: Table sizes in 1.1.50
« Reply #2 on: March 12, 2009, 09:24:47 pm »
This new sizes are remain in the future?

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Table sizes in 1.1.50
« Reply #3 on: March 13, 2009, 01:10:51 am »
It is normal that the Vemstune shows 16x14 Ve, 12x12 Spark and 8x8 Lambda table?
From which firmware bring this changes?

From 1.1.50
And all tables now have own y/x(map/rpm) values.

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Table sizes in 1.1.50
« Reply #4 on: April 20, 2009, 06:01:49 am »
From 1.1.50
And all tables now have own y/x(map/rpm) values.

Excellent news there.  I can finally dial out the compromise between VE and spark bins at low throttle on the TVR.