Here's a couple pics of a car we're just finishing up. For more details on the build, follow the link at the bottom.
The stock manifold with the throttles that are cast into the manifold and the ports for the auxiliary air and cold start injector.
The manifold after the throttles and fittings were sawed off, and a throttle mounting plate for the new DBW throttles was welded on.
Manifold with throttles mounted and harness being routed/fitted.
The DBW controller I custom built along with the accelerator pedal sensor and two throttles.
For more pics and info follow this link.
http://dangonay.com/lambo
