« previous next »
Pages: 1 [2]

Author Topic: Fuel pump channel not grounding.  (Read 16458 times)

Offline Clio-wizard

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 2
Re: Fuel pump channel not grounding.
« Reply #15 on: October 14, 2008, 09:48:52 pm »
I no he has been hasstling you but I made him aware of this problem 7 weeks ago and I had a text from him saying he spoke to you about 2 weeks ago and he still hasnt called me back to do the changes!!

Anyway just wanted to clarify that not here to put people down.

Thanks for your advice not 100% sure what i'm doing but will have a look  ;D
Logged

Offline Clio-wizard

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 2
Re: Fuel pump channel not grounding.
« Reply #16 on: November 10, 2008, 02:06:13 pm »
Ok taken long enough but been looking into this and have been with my mapper all weekend.

If the GRN5 (power grounds) are longer then the specified max 0.3m will this have an effect on the problems I am havng?!  ???
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Fuel pump channel not grounding.
« Reply #17 on: November 10, 2008, 02:45:03 pm »
The only rule is that they go from their separate pins to one large grounding wire within that length.
Logged
Pages: 1 [2]
« previous next »