Lambda Backwards,

[Tony C]

Hi All,
noticed tonight while tuning the lambda,
that on the grid table, if you move the cursor any where on the lambda grid and lift that point up, it saya richer instead of leaner,
went from 0.99 to 1.07 and it said it was richer,
will this cause any probs?

or is every ones display like this?

[Stuball]

Mine is like this too, raise the lambda and the display says "richer".

Stuball

[rob@vems.co.uk]

Is this on MegaTune?

[rob@vems.co.uk]

Just check it you're right, and its wrong.

If you find the vemsv3.ini file and find the entry:
table = lambdaTbl, lambdaMap, "Target Lambda Table",3
   xBins = rpmBinsA, rpm
   yBins = mapBinsA, map
   zBins = lambdaTable
   gridHeight = 1.2
   upDownLabel = "(RICHER)", "(LEANER)"

To:

table = lambdaTbl, lambdaMap, "Target Lambda Table",3
   xBins = rpmBinsA, rpm
   yBins = mapBinsA, map
   zBins = lambdaTable
   gridHeight = 1.2
   upDownLabel = "(LEANER)", "(RICHER)"

[Tony C]

Ta Rob,