« previous next »
Pages: [1]

Author Topic: Load based ignition doesn´t seem to be doing anything  (Read 6122 times)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Load based ignition doesn´t seem to be doing anything
« on: January 29, 2017, 09:56:07 pm »
I wanted to test the Alpha-N setting where Ignition used calculated load, but at 5000rpm and 150kpa and 50% TPS (on the bench) the ignition is only the same as the bottom row of the ignition table.

Anybody have any details on how to set this up currently I have

Alpha-N
Before Throttle
Kpa
Load

Is this a firmware thing that needs enabling?

Logged
Pages: [1]
« previous next »