Hello.
I purchased a harness for my Audi AAN engine, VEMS I-6 Base Harness
" V3 twin shield harness with 6 injector connector " Harness is to be used in conjunction with a VEMS Econoseal V3 ECU.
It looks like there are many different periods or versions of this Harness, but almost all of the colors are the same across the different versions.
Looked here but I do not see any version newer than 2012.
http://vems.hu/download/harness/v3TwinShieldHarness/ The paperwork that can with the harness states that it is Version 2014/4 .
My objective is to decipher the colors on the engine side so I can start making terminations there for things like CPS, CTS, MAP, Knock sensors, etc.
Or, in this care is the easiest way to take the Pinouts for VEMS Econoseal and work backwards?
