« previous next »
Pages: [1]

Author Topic: Where to ground -> glassfiber buggy  (Read 4608 times)

Offline mads b (dk)

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
Where to ground -> glassfiber buggy
« on: April 18, 2014, 06:15:51 pm »
Where should i put my grounds ?

Engine is under the black cross
Battery is under the blue cross

Ecu is mounted on a 2mm stainless steel plate, i have perpared a line of 6mm bolts for grounding on the plate.

where to put GND5 (powrground). ?
where to put sensor GND ?

https://www.dropbox.com/s/47uucgpqvje1tc4/buggy-vems-grunding.jpg
« Last Edit: April 18, 2014, 06:24:55 pm by mads b (dk) »
Logged
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: Where to ground -> glassfiber buggy
« Reply #1 on: April 19, 2014, 11:07:40 am »
Hello Mads b (dk),

Its best to follow instructions on this wiki page:

http://www.vems.hu/wiki/index.php?page=GenBoard/Manual/GroundConnections

Should there be any uncertainties after reading this, feel free to ask.

Best regards, Dave
Logged
Pages: [1]
« previous next »