My Vemstune corrupts data

[perboddum]

Hi
Just a warning....
My vemstune 1.5.24 (2014-01-08) corrupts my VE and ignition table MAP/TPS settings.
This happens when I edit data in 3D editor. It is bad when you run Alpha-N.
My TPS was 0-1-2-3-5-7......
After 3D edit vemstune changed this to
0-1-1-3-5-7......
in the VE table (not 3D editor)
That confuses vems ECU and the car runs really bad.
The VE/IGN data does not seem to be changed. Only TPS/MAP settings.
I have issued a bug report and hope it will be fixed.

regards
Per

[VEMS]

Hello Per,

We have received your report, issue is under investigation.

It is triggered when issuing BURN command from 3D table editor, corruption is contained to Alpha-N TPS axis only (not MAP/RPM axis or tables values)
Workaround to be able to perform useful tuning in the meantime (when using Alpha-N), use 2d table editor during real-time mapping until fix is released.

Best regards, Dave