Author Topic: No primary trigger signal (VR) (Read 14693 times)

njorge0319 · « **Reply #15 on:** April 08, 2013, 06:25:21 pm »

Thanks! I'll try when I get home today.. I already ordered some spare lm1815 from mouser, so should have those soon.

What does vcc stand for? I was lookin at a vems board schematic earlier and kept seeing that and pin 8 on the diagram u jut posted says vcc also

njorge0319 · « **Reply #16 on:** April 08, 2013, 07:44:21 pm »

Well I have 5v at pin 8 with ignition on, when I crank the engine with the starter it goes to 0v. I'm not really sure what I'm looking for here to determine if it is infact bad.

News:

Author Topic: No primary trigger signal (VR) (Read 14693 times)

njorge0319

Re: No primary trigger signal (VR)

njorge0319

Re: No primary trigger signal (VR)