Avcs/vvti/vanos control problem

[Denmark]

Hi all,

Any inputs to get this subaru running right

http://www.vems.hu/wiki/index.php?page=SubaruEj


Thanks
Skassa

[peter_jensen]

I do not think any people can help you on this forum as you are the first in the world that have this setup. Wait for development team to test your settings.

Peter 

[Denmark]

And a new problem have allready arrived ,
I now have a costumer who have a 07' wrx with avcs, but that run the trigger setup with a 36-2-2 on the crank , and a Hall sensor on each inletcam that each have a 4-1 trigger

[peter_jensen]

This is not a problem this is just more work :-) Subaru is a neverending story. Dual AVCS is now working using 4 trigger inputs.
Link to your nice car http://www.youtube.com/watch?v=E6KgZdKDGIo

Peter

[Erikk]

And a new problem have allready arrived ,
I now have a costumer who have a 07' wrx with avcs, but that run the trigger setup with a 36-2-2 on the crank , and a Hall sensor on each inletcam that each have a 4-1 trigger

I have a few 2006 Subaru wrx coming up soon, i havent gotten into any research yet. Do they also run the same trigger as 2007 ?

[Denmark]

Yes if its the hawkeye model it runs 36-2-2-2 , and avcs on the inlet cams,
Vr crank , Hall 4-1 on both cams were the left is also used for secondary trigger,

This setup i belive dosent work yet , but belive its a easy fix ,

The do also run a electronic throttle , this is also not controleble,
I plan in using a wire throttlebody instead


Regards
Skassa