Author Topic: Setup stepper  (Read 6788 times)

Offline 306 2.0 16v

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
Setup stepper
« on: October 04, 2012, 02:30:10 pm »
Hello. I have put a vems on my peugeot 306 2.0 16v and keep many of the same settings that I had on my old peugeot 205 2.0 8v. but the new car running with a stepper instead of a acuacot. and I do not know how to get it to work. it is connected in the sense that the EC 18 is set to pin10 two A pin11 two B pin 5 to C pin 4 to D ..
but how should the control of mega tune I run with the old version 1.0.53
hope to have someone who can help me.

regards dennis

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Setup stepper
« Reply #1 on: October 05, 2012, 01:15:53 am »
Hello. I have put a vems on my peugeot 306 2.0 16v and keep many of the same settings that I had on my old peugeot 205 2.0 8v. but the new car running with a stepper instead of a acuacot. and I do not know how to get it to work. it is connected in the sense that the EC 18 is set to pin10 two A pin11 two B pin 5 to C pin 4 to D ..
but how should the control of mega tune I run with the old version 1.0.53
hope to have someone who can help me.

regards dennis
download vemstune + use newer firmware. http://vems.hu/download/v3gui/NIGHTLY/
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline 306 2.0 16v

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
Re: Setup stepper
« Reply #2 on: October 07, 2012, 06:40:57 pm »
Thanks for your reply. It seems to idle works now.

so now all I need to get the engine to take rpm. it will only go up in rpm when it reaches 50% throttle.

thanks dennis

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Setup stepper
« Reply #3 on: October 08, 2012, 05:21:10 pm »
It´s best to post a log and config.

you can even do that from within Vemstune, which you should be usinga and post the link to here.