« previous next »
Pages: [1]

Author Topic: Random misfire when over 270kpa  (Read 5747 times)

Offline baytires

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Random misfire when over 270kpa
« on: October 12, 2012, 06:31:45 am »
Hello
I'm running 1.1.96 firmware, GT3076R
Audi 2.2 AAN engine, BKR8EIX out of the box plugs, misfire was worse before with Bosch, NGK plugs work great even on hot weather.
High Output Coils from 034

Anytime I go over 270kpa I have random misfire.

Coil Charge Time is 2.50 ms
Coil Charge MAP scale is 30

What could the reason of misfires?
Logged

Offline stroft

  • Jr. Member
  • **
  • Posts: 16
  • BHP: 1
Re: Random misfire when over 270kpa
« Reply #1 on: October 12, 2012, 01:36:12 pm »
Spark plug gap ?
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Random misfire when over 270kpa
« Reply #2 on: October 12, 2012, 03:21:53 pm »
What is the dwell at that time?
Do you know what the maximum current capacity of the coil is and at what dwell time?
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: Random misfire when over 270kpa
« Reply #3 on: October 13, 2012, 08:36:12 am »
Dwell boost scaling can go just up to +40%. 3.5ms is nothing dangerous for these coils. with long dwell times they want to produce nose in wiring. I recommend to use capacitor at each coil supply if some problems appears.

https://picasaweb.google.com/106058819169295752360/IgnitionCoils#5145002805502472898

I think IGN-1 coils are overrated. Their produce high energy. But problem - in too long time. For high rpm applications no sense for that...

Go with small spark plug gaps.

And what injectors you use?

Gints
Logged
Pages: [1]
« previous next »