Does anyone know best vems settings for this 840cc injector?
I'm using six of them for just 240HP
Siemens injector 980cc HighZ
Siemens 110324 injector high-impedance injector.
length: 59.35mm between O-rings (middle to middle).
New style, all plastic, fully compatible with old style (dark grey color, pencil style)
Flow Rate: 840-850cc/min @ 3 bar (= 300 kPa = 43.5 psi). 80LBS/HR
Flow Rate: 970-981 cc/min @ 4 bar (=400kPa = 58 psi)
If you order 4 pieces or more: with normal AMP injector connector (unlike the picture, no adapter needed). Resistance: 12-16 Ohms (series power resistor not needed)
http://shop.vems.hu/catalog/siemens-injector-980cc-highz-p-136.html