« previous next »
Pages: [1]

Author Topic: Trigger signals. From VR to HALL  (Read 7252 times)

Offline Reidar

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 1
Trigger signals. From VR to HALL
« on: March 23, 2011, 02:40:24 pm »
Hi.

I`m looking for a guide/pictures of how we convert from VR to HALL or the other way around. I`ve been searching the wiki, and I`m pretty sure it`s in there somewhere, but simply cant find any straight forward guide. So I was thinking that we could have a guide made here, for both Primary and secondary trigger.

Anyone? :)
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Trigger signals. From VR to HALL
« Reply #1 on: March 23, 2011, 03:05:49 pm »
This was for v3.2 http://www.vems.co.uk/VEMS/InputTrigger.html
It may or may not work for newer boards.
Logged

Offline Reidar

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 1
Re: Trigger signals. From VR to HALL
« Reply #2 on: March 23, 2011, 03:17:24 pm »
that is exactly what I`m looking for. Could anyone verify if this procedure is the same at the 3.6 boards?
Logged

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: Trigger signals. From VR to HALL
« Reply #3 on: March 23, 2011, 05:43:45 pm »
It's pretty much the same, check out the PDF  link at the top of this page :
http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FInitialTesting%2FVerThree
Logged
Pages: [1]
« previous next »