Author Topic: 12x12 Lambda Table  (Read 18263 times)

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: 12x12 Lambda Table
« Reply #15 on: June 01, 2007, 07:52:49 pm »
I'd recommend getting the bottle filled and running at the correct pressure.
And then try all the options back to back on the 1/4mile to see what differences it makes.

As for fuel - 0.69 is on the rich side of things, but its on the safe side of things too.
Lets face it a full on drag race engine sits on this side of grenading for the time its at WOT.

Offline Tony C

  • Hero Member
  • *****
  • Posts: 650
  • BHP: 8
    • Capriracing
Re: 12x12 Lambda Table
« Reply #16 on: June 03, 2007, 10:56:43 pm »
Did some datalogs while on closed loop and running on and off gas today.

On Gas:


Off Gas:


The above datalogs are in the zip file below.
http://www.v-8.org.uk/zipfiles/latestlogs.zip

Vems Ecu, Twin Plenum efi and N2o
13.314 @ 104.39 mph (10/06/07 3.9 v8)
Sponsored by: www.caprisport.com & www.interpart.biz
Web site: http://www.capriracing.co.uk

Vems Firmware: V1.1.74