Author Topic: New User from Germany  (Read 6317 times)

Offline gladiator

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
New User from Germany
« on: June 20, 2010, 05:10:31 pm »
Hi I´m from Germany, thats why my english not realy good.
I am 26 years old and my name is Andy.
I´m an owner of an Audi RS4 B5 and an Audi 80 with 20VT (with GT40R) running on VEMS.
It´s not easy to understand the VEMS, so I will have some questions about it.
In germany to find someone who helps, to setup the VEMS.
BG Andy

Offline Alx

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 1
Re: New User from Germany
« Reply #1 on: June 21, 2010, 05:54:39 am »
Hi,

Where in Germany are you?

Any specific problems?

Have done two 5-cylinder conversions and one RS4 Biturbo race car and everything runs well. One 1,8 T is on the way too.

Send me a PM with your e-mail if you need help.

\Alex

Offline gladiator

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 0
Re: New User from Germany
« Reply #2 on: June 22, 2010, 01:28:21 pm »
Oh Thanks fo you fast answer.
I,m coming from east (Sachsen).
Yes there are some problems.
I started with an older Firmware with VE-Learn.
Now I had uploaded a newer firmware 1.1.74 (???) because of a software from a tuner.
It runs better, but the idle control don´t work, also is the EGO-Cerrection at about 60% althoug the injektion time dropped down.
There is no VE-Learn? why not- it was perfektly!!!!!!
I also tryed to tune launch-control with road-speed, but the VEMS doesn´t recognize the raod speed.
Sorry, for my bad english.
BG Andy

Offline Alx

  • Jr. Member
  • **
  • Posts: 3
  • BHP: 1
Re: New User from Germany
« Reply #3 on: June 22, 2010, 05:03:28 pm »
I have sent you a personal message in German.

VE-learn is still possible. Runs on the basis of a saved datalog and is called "Tune by Statistics". Functions very well, actually.

Regarding your injection time, you may need to check if you have MAP multiplication active. This will require your VE table to be almost flat.

What is the serial number of your VEMS? If you have an older box, you may need to modify it to use road speed. Not very difficult to fix.

Post a log file, and feel free to reply to my personal message in German.

\Alex
« Last Edit: June 22, 2010, 05:17:57 pm by Alx »