Author Topic: Used VEMSTune for the first time last night... wow  (Read 7620 times)

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5
Used VEMSTune for the first time last night... wow
« on: January 27, 2010, 11:54:53 pm »
I was very impressed with it!

It was pretty logical, and nicely designed for the most part.  I know it's still work in progress but I liked it so much more then MT.  I used it on a 1.0.73 ECU, so I didn't use any new or special features.

But I thought I'd leave some feedback, and I'm hoping to upgrade a few ECU's to newer 1.1.x FW soon with it.

Has anyone else completely ditched MT yet in favor of VEMSTune?  I obviously still have MT installed, but I'm going to try to use it less and less now.

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Used VEMSTune for the first time last night... wow
« Reply #1 on: January 28, 2010, 12:56:10 am »
It's good isn't it? ;)  Having the firmware upgrade integrated is a really good feature for the likes of me.

I don't use MT for VEMS any more other than for extracting really old configs from old ECUs.

Offline multiplex

  • Full Member
  • ***
  • Posts: 151
  • BHP: 6
Re: Used VEMSTune for the first time last night... wow
« Reply #2 on: January 28, 2010, 02:35:32 am »
vemstune has come a long way! using it exclusively now.  Hoping to test out the new VE calculator shortly

i check for vemstune updates every few days  :o

Offline blown_g

  • Jr. Member
  • **
  • Posts: 18
  • BHP: 0
Re: Used VEMSTune for the first time last night... wow
« Reply #3 on: February 14, 2010, 09:07:10 pm »
How do you renew your firmware?

Offline AVP

  • Hero Member
  • *****
  • Posts: 743
  • BHP: 11
Re: Used VEMSTune for the first time last night... wow
« Reply #4 on: February 14, 2010, 09:38:23 pm »
what settings for connection to ECU with serial port are they good to be used?

i gave it a try today with 19200 baud rate

5ms timeout
3ms ignored realtime error count
5 inter right delay and although it did communicate with the ECU, after opening a couple of tables, all gauges went crazy and the whole thing got stuck.


Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Used VEMSTune for the first time last night... wow
« Reply #5 on: February 24, 2010, 04:07:44 am »
19200baud
timeout 5
error count 3
write delay 50