« previous next »
Pages: [1]

Author Topic: Wideband and VEMSTUNE problem  (Read 5847 times)

Offline Ellisd

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 4
Wideband and VEMSTUNE problem
« on: December 06, 2009, 07:42:02 pm »
I thought I'd have a bash using Vemstune instead of megatune for a change, but have had a problem.  Vemstune wont detect my gauge on com 4.  It is a USB to serial convertor but it works fine with megatune.  Is there something i'm missing?  I've checked and all the connection settings seem to be the same for both Vems and Megatune but still no joy  :-\
« Last Edit: December 06, 2009, 07:43:45 pm by Ellisd »
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Wideband and VEMSTUNE problem
« Reply #1 on: December 07, 2009, 02:09:32 pm »
Very strange... Does your USB->Serial have LEDs on them to see if there is any communication at all?
Logged

Offline Ellisd

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 4
Re: Wideband and VEMSTUNE problem
« Reply #2 on: December 07, 2009, 05:34:08 pm »
Unfortunately it doesn't.  It's just a cheap ebay jobbie and I know the vast majority of problems stem from driver problems but I just find it wierd how it works with one and not the other  ???  I'm assmuming it should just be a case of installing the software and away you go?
Logged

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Re: Wideband and VEMSTUNE problem
« Reply #3 on: December 08, 2009, 06:34:01 am »
Look at the firmware thread, report it there
Logged
Pages: [1]
« previous next »