Mounting EGT on KKK16 turbo with integrated collector

[mr_g]

KKK16 has integrated exhaust collector in to the turbine housing... So it's pretty obvious I cannot drill in it... It's too small and too risky that could result with buying another turbine...

I have bigger EGT (thick one) from VEMS shop...

The picture isn't so clear...

[[email protected]]

I'd put the hole in at the point where the wastegate T's off from the housing.  After pulling the turbo out of the turbine housing of course.

[mr_g]

Can you mark it on the picture?