Default settings

[tcode]

Hi,

is it possible to set any other display options than default one after power on?

Thx

[[email protected]]

Which other settings would you like to set?

[tcode]

I apologize for delay on answer, been out for a while.
Not any specifically, just wondering is it possible trough button on gauge or other simply way like MegaTune.

[[email protected]]

The User Guide http://www.vems.co.uk/VEMSWB/UserGuide/README.html has the display modes listed:
1. Lambda & Internal temp C, 2. AFR & Internal temp C, 3. Lambda & EGT C, 4. AFR & EGT C, 5. Lambda & Internal temp F, 6. AFR & Internal temp F, 7. Lambda & EGT F, 8. AFR & EGT F, 9. Lambda & MAT C, 10. AFR & MAT C, 11. Lambda & RPM, 12. AFR & RPM, 13. Lambda & MAT F, 14. AFR & MAT F.

[tcode]

Oh, I know what other options it has, but I wonder if it possible to have any of those I like straightway after power on? For example,option 5. Lambda & Internal temp shows after power on without pushing button 4 times.
Sorry if I'm bothering you with this, it's really nothing that much important, I'm just curious.

[[email protected]]

You can use the MegaTune app to set the values, then when you burn to unit it will default to what you set at start-up.

[ranz]

Is there a way to delete or disable some modes (example: modes in F).
And other odd thing is that when I configure the gauge with megatune, when I choose EGT C it shows me temperature in F and thats not only one, other names are also, I choose one but gauge shows something else.
One thing more, 3 mode should be Lambda & EGT C but megatune shows to me that third mode is AFR & EGT C ???

[[email protected]]

I'm afraid that those modes are stuck in place.
I dont know about the MT settings, I only use the terminal interface.

Rob