News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Unable to get the knock detection working on a BMW M52 (V3 PNP)

Started by macintosh14568, March 31, 2022, 07:41:21 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

macintosh14568

March 31, 2022, 07:41:21 PM
Does anyone have some recommended settings to get the knock sensors working? Whenever I get the average knock value close to my knock reference average setup correctly and turn on knock detection it constantly goes off. (isknocking always on). I tried to play with the threshold for mean value with no luck.

Kamuto

#1
April 08, 2022, 12:29:01 PM
Quote from: macintosh14568 on March 31, 2022, 07:41:21 PM
Does anyone have some recommended settings to get the knock sensors working? Whenever I get the average knock value close to my knock reference average setup correctly and turn on knock detection it constantly goes off. (isknocking always on). I tried to play with the threshold for mean value with no luck.
base settings from menus are quite good :))
Vems installer in Lithuania
[email protected]
Print
Go Up Pages1
User actions