News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

map vs alpha n?

Started by Seight-v8, April 12, 2021, 07:09:23 PM

Previous topic - Next topic

Seight-v8

hello all,

just been reading a fairly new rover v8 tuning book......and the section on ECU tuning, says that non turbo cars, with map readings under 65kpa, and large overlap cams, would be better on ALPHA N (TPS) maps instead of speed density maps......

So if this is true?, then mine would meet all of these requirements......but ive never used anything other than SD map based.....

i don't want to start down a road that makes it worse and has other side effects......

So thought i would ask.

thanks
scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond